Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

High CPu utilization in 4500

Hi I have switch 4500 on whcich i am getting high CPU utilization when we chechked by command show process cpu it showing it is due to "Cat4k Mgmt LoPri" and " Ip input" and cisco doc suggest the command "show platform health" and found the process "K2CpuMan Review" and "K2FibFlowCache flow"is high. Please help me out to resolve the issue

1 REPLY
Super Bronze

Re: High CPu utilization in 4500

"Cat4k Mgmt LoPri" is documented as a bug for several 4500 releases, although from a quick scan, it might not be in your IOS version. (See http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/release/note/OL_5184.html)

There are conditions that can cause this, and since your IP Input % is high, it might be the situatution for you. See http://www.cisco.com/en/US/products/hw/switches/ps663/products_tech_note09186a00804cef15.shtml/

845
Views
0
Helpful
1
Replies
CreatePlease to create content