Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

High CPU Utilization

Hi all,

I have 4503 in my network and for the last 3 days its CPU utilization is touching almost 99%... No major changes have occured during the last 3. I have debugged a lot. Nothing unusual .. even restarted the entire switch but the problem persist. I have attached output of "sh processes cpu", "sh ver" as well. Any help please.

Regards,

Sheeraz

2 REPLIES
Silver

Re: High CPU Utilization

Hi, The "IP input" process has a high %, take a look at the next url, it may help you to find the problem:

http://www.cisco.com/en/US/products/hw/routers/ps359/products_tech_note09186a00801c2af3.shtml

Regards

Hope this helps, if so pls rate post

Re: High CPU Utilization

This sounds like a case of process switching. Can you get a 'show platform health'?

Also, check your SVIs for input drops. Are there a lot of input drops on one of the SVIs? If so, get a sniffer set up in that vlan and see what you can see. =)

127
Views
0
Helpful
2
Replies
CreatePlease login to create content