cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
725
Views
0
Helpful
1
Replies

high cpu

Richard.Jeff
Level 1
Level 1

Hi,

I have a 6506 switch used as an L3 switch and running image as s3223-advipservicesk9_wan-mz.122-18.SXF14.bin.

The switch CPU utilization is going high intermittently above 90% and it comes down automatically.

I can see that the 64% of the cpu utilizaion is due to SNMP confCopyPro and I have attached the output here.

Please let me know why it happens and what is the remedy

Thanks

1 Reply 1

Viral Bhutta
Cisco Employee
Cisco Employee

Are you using SNMP process to back up your configuration using TFTP?

How big is your running configuration. If it is big then yes you might see a spike while the configuration is getting backed up. Do you see this behavior only on this switch?

Can you relate the time at which you see the spike and also the time the configuration is getting backup match?

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco