We have router cisco 1000 with image c1005-ny-mz_112-14.bin. Recently we are seeing on this router with high memory utilization and sometimes high CPU utilization. Rebooted the router couple of times in order to clear any of the memory leakage(Not sure this is the correct troubleshooting).
Router_1024>sh mem sum
Head Total(b) Used(b) Free(b) Lowest(b) Largest(b)
Processor 22E70A0 626528 626504 24 0 24
I/O 2380000 524288 297128 227160 207172 216424
Router_1024>sh proc cpu
CPU utilization for five seconds: 5%/4%; one minute: 8%; five minutes: 8%
I would appreciate if someone from this group can help me providing the troubleshooting steps(Practicle) to resolve the highmemory utilization errors. Attached the sh mem summary output from this router. Please post your comments if you need any other information.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...