Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Bronze

history buffer

hi every body!

My book shows following commands:

history size x (line configuration mode)

terminal size X ( exec mode)

If both commands set to diffirent number, which one will take precedence?

Thanks a lot!

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Bronze

Re: history buffer

I believe you are comparing history size and terminal history size.

http://www.cisco.com/en/US/docs/ios/fundamentals/command/reference/cf_f1.html#wp1016413

The history size will affect any connections made to that line while the terminal history size will only affect the current session. Once that session disconnects it will revert back to the default.

The terminal history size will change the size during that session so it overrides any history size setting for that session.

HTH,

__

Edison.

2 REPLIES
Hall of Fame Super Bronze

Re: history buffer

I believe you are comparing history size and terminal history size.

http://www.cisco.com/en/US/docs/ios/fundamentals/command/reference/cf_f1.html#wp1016413

The history size will affect any connections made to that line while the terminal history size will only affect the current session. Once that session disconnects it will revert back to the default.

The terminal history size will change the size during that session so it overrides any history size setting for that session.

HTH,

__

Edison.

Bronze

Re: history buffer

thanks Edison!

1843
Views
0
Helpful
2
Replies