04-02-2008 11:05 PM - edited 03-05-2019 10:09 PM
how can i assign a PC into a vlan? can anyone tell me the commds& process and how can i shut and unshut ports..
Solved! Go to Solution.
04-02-2008 11:12 PM
Hi Phani ,
Ex : First create vlan on the switch.i.e
Interface Vlan x
ip address 10.10.10.1 255.255.255.0
no sh
Connect PC to anyport on the switch .i.e
If PC is terminated on f0/1
interface f0/1
switchport mode access
switchport access vlan x
no sh
You can shut or no shut any port of rouer or switch using " shut " and "no shut" command in interface mode.
ex: no shut
interface f0/1
no sh
admin shut:
interface f0/1
shut
Thanks,
Satish
04-02-2008 11:12 PM
Hi Phani ,
Ex : First create vlan on the switch.i.e
Interface Vlan x
ip address 10.10.10.1 255.255.255.0
no sh
Connect PC to anyport on the switch .i.e
If PC is terminated on f0/1
interface f0/1
switchport mode access
switchport access vlan x
no sh
You can shut or no shut any port of rouer or switch using " shut " and "no shut" command in interface mode.
ex: no shut
interface f0/1
no sh
admin shut:
interface f0/1
shut
Thanks,
Satish
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: