Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

how can i change & save date,time 2950 & 2960

How can i chnage & save date,time 2950 & 2960 switches

6 REPLIES
Cisco Employee

Re: how can i change & save date,time 2950 & 2960

Hi Upendra,

Have a look at this link and it will guide you with the same

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2960/12225see/scg/swadmin.htm#wp1020905

HTH

Ankur

*Pls rate all helpfull post

New Member

Re: how can i change & save date,time 2950 & 2960

dear

i changed date & time but when i restart my switch it's showing me default date & time

Purple

Re: how can i change & save date,time 2950 & 2960

That is normal and the only way around that is to setup ntp on your switches . They are not battery backed up so they wills always go back to the default time when power cycled.

Cisco Employee

Re: how can i change & save date,time 2950 & 2960

I agree with Glen on this.If no other source of time is available, you can manually configure the time and date after the system is restarted. The time remains accurate until the next system restart.

You can configure the switch as NTP client and configure one of your router as NTP server. Till the time you have the router up, no matter how many times the switch reboots, it will always sync the time with the NTP server.

HTH,

-amit singh

New Member

Re: how can i change & save date,time 2950 & 2960

Dear

can you tell me how can i setup ntp server.

New Member

Re: how can i change & save date,time 2950 & 2960

3462
Views
0
Helpful
6
Replies