How can I disconnect two sessions

[burleyman]

I have two sessions that I need to disconnect. How can I do this from a console session?

Here is the show user output

4506#show user

Line User Host(s) Idle Location

* 0 con 0 idle 00:00:00

1 vty 0 idle 30w2d dgth1.nixonpeabody.com

2 vty 1 idle 9w0d 10.10.4.2

Thanks

[chrihussey · Accepted solution]

Try the following commad from enable mode:

"clear line vty X", where X = line 1 or 2

[burleyman]

Thanks....Worked great.

[ankbhasi · Accepted solution]

Hi Friend,

Can you try "clear line 1" & "clear line 2" OR "clear line vty 1" & "clear line vty 2"

If this does not work can you post the output of "show tcp brief".

Regards,

Ankur

[burleyman]

Thanks....Worked great.

[Iain · Accepted solution]

Burleyman,

Heres how you do it. Clear line vty (vty number you want to clear)

Example: clear line vty 0

The command above would clear the nixonpeabody.com connection.

[burleyman]

Thanks....Worked great.