Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k

How can I disconnect two sessions

I have two sessions that I need to disconnect. How can I do this from a console session?

Here is the show user output

4506#show user

Line User Host(s) Idle Location

* 0 con 0 idle 00:00:00

1 vty 0 idle 30w2d dgth1.nixonpeabody.com

2 vty 1 idle 9w0d 10.10.4.2

Thanks

3 ACCEPTED SOLUTIONS

Accepted Solutions

Re: How can I disconnect two sessions

Try the following commad from enable mode:

"clear line vty X", where X = line 1 or 2

Cisco Employee

Re: How can I disconnect two sessions

Hi Friend,

Can you try "clear line 1" & "clear line 2" OR "clear line vty 1" & "clear line vty 2"

If this does not work can you post the output of "show tcp brief".

Regards,

Ankur

New Member

Re: How can I disconnect two sessions

Burleyman,

Heres how you do it. Clear line vty (vty number you want to clear)

Example: clear line vty 0

The command above would clear the nixonpeabody.com connection.

6 REPLIES

Re: How can I disconnect two sessions

Try the following commad from enable mode:

"clear line vty X", where X = line 1 or 2

Re: How can I disconnect two sessions

Thanks....Worked great.

Cisco Employee

Re: How can I disconnect two sessions

Hi Friend,

Can you try "clear line 1" & "clear line 2" OR "clear line vty 1" & "clear line vty 2"

If this does not work can you post the output of "show tcp brief".

Regards,

Ankur

Re: How can I disconnect two sessions

Thanks....Worked great.

New Member

Re: How can I disconnect two sessions

Burleyman,

Heres how you do it. Clear line vty (vty number you want to clear)

Example: clear line vty 0

The command above would clear the nixonpeabody.com connection.

Re: How can I disconnect two sessions

Thanks....Worked great.

161
Views
0
Helpful
6
Replies
CreatePlease to create content