Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How do I configure it so I can Hit a Wan ip address from My Lan?

Namely, I want to be able to use the wan IP address for MY Terminal Server, WSUS Server, etc from both My LAN users and WAN users.

I should mention that I am using a Cisco 1811 and SDM Version 2.41

3 REPLIES

Re: How do I configure it so I can Hit a Wan ip address from My

If you're wanting someone to come into your network to use your TS, you'll need to configure static nat and map your public IP to a private address on the inside.

HTH,

John

HTH, John *** Please rate all useful posts ***
New Member

Re: How do I configure it so I can Hit a Wan ip address from My

I can already hit them all from the outside, and have this set up.

I want to be able to hit my servers on my 192.168.1.*, using their Wan addresses 205.*.*.20 from on the LAN (192.168.1.*).

Something to tell my internal network machines that the wan address given should be redirected to in-house.

Re: How do I configure it so I can Hit a Wan ip address from My

I'm not sure this will be possible, but I've never had to configure it.

John

HTH, John *** Please rate all useful posts ***
189
Views
0
Helpful
3
Replies