Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How do I copy config to TFTP?

What is the commands to copy a router config to a TFTP server?

8 REPLIES
New Member

Re: How do I copy config to TFTP?

copy run to tftp

copy startup to tftp

Purple

Re: How do I copy config to TFTP?

The good old standby "write net" also works .

New Member

Re: How do I copy config to TFTP?

The first, You should check your NVRAM or you have to find where start-config.cfe is being.

please type the command:dir all:

and then type the command: copy nvram:start-config.cfg tftp

It could be copy to your tftp-server.

Re: How do I copy config to TFTP?

Hi

do rever back from which mode you want to copy the file from TFTP server ?

from your normal router prompt or from rommon prompt ?

regds

Re: How do I copy config to TFTP?

You can also use

copy system:/running-config tftp:

Narayan

New Member

Re: How do I copy config to TFTP?

hi

just write this commands in global mode

router#copy running-config tftp

New Member

Re: How do I copy config to TFTP?

i have to do this on a few routers, is there an automatic way to schedule all this?

New Member

Re: How do I copy config to TFTP?

I think you must do this process on each router.

You can use some GUI IOS copier softwares so that you can upload IOS to many routers..

hope this may helps you

280
Views
0
Helpful
8
Replies