Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

How do I enable ip forwarding/routing on a cisco catalyst 2960

How do I enable ip forwarding/routing in cisco catalyst 2960?

I am currently running: Version 12.2(44)SE3

4 REPLIES
Hall of Fame Super Silver

Re: How do I enable ip forwarding/routing on a cisco catalyst 29

Hello Mike,

C2960 should be a L2 only switch

check here

http://www.cisco.com/en/US/docs/switches/lan/catalyst2960/software/release/12.2_46_se/configuration/guide/swintro.html#wp1528661

so you should not be able to use it for inter vlan routing

Hope to help

Giuseppe

Purple

Re: How do I enable ip forwarding/routing on a cisco catalyst 29

Layer 2 only , no routing on this switch.

New Member

Hello in some releases you

Hello in some releases you can enable ip routing on a L2 switch c2960 with SDM preferences depends which IOS release you are running

(config)#sdm prefer lanbase-routing

This worked for me.

Gary

 

Purple

  Yeah this thread is 5 years

  Yeah this thread is 5 years old, before they enable routing on the 2960's.  Think you have to have at least 12.2.55 code also.

3237
Views
0
Helpful
4
Replies
CreatePlease to create content