Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How do I Implement VLAN Rate Limiting or QOS for a Cisco 2960

I have a 2960 that I need to limit the uplink port to 50Mbps for 3 vlans and 350Mbps for another vlan. Would the following config achieve that or is this even possible for the 2960?

class-map match-any VLAN50-51-52

match vlan 50-52

class-map match-any VLAN53

match vlan 53

policy-map 50MB_RATE_LIMIT

class VLAN50-51-52

police 50000000 5000000 exceed-action drop

class VLAN53

police 350000000 35000000 exceed-action drop

!

interface GigabitEthernet0/23

service-policy output 50MB_RATE_LIMIT

service-policy input 50MB_RATE_LIMIT

Everyone's tags (3)
1 REPLY
Cisco Employee

How do I Implement VLAN Rate Limiting or QOS for a Cisco 2960

Hello Jason,

Based on the config guide for this platform here are the supported match statement:

http://www.cisco.com/en/US/docs/switches/lan/catalyst2960/software/release/12.2_58_se/configuration/guide/swqos.html#wp1056668

match {access-group acl-index-or-name | ip dscp dscp-list | ip precedence ip-precedence-list}

Fabienne

TAC

2417
Views
0
Helpful
1
Replies
CreatePlease to create content