Re: How do i mark packets with dscp values on cat3560emi?
The behavior that you are seeing is expected, since fixed unit switches do not display the QoS statistics when using the "show policy-map interface gix/x" command.
On fixed units we can use the "show mls qos interface gix/x statistics" to verify the marking of packets on ingress/egress. Or verify the markings with a sniffer capture as you did.
show policy-map [policy-map-name [classclass-map-name]]
Display QoS policy maps, which define classification criteria for incoming traffic.
Note Do not use the show policy-mapinterface privileged EXEC command to display classification information for incoming traffic. The control-plane and interface keywords are not supported, and the statistics shown in the display should be ignored.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.