Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

how i set SSH login on catalyst

hello ,

i have catalyst 4507r and i want todevloped ssh login of telnet on catalyst

how i do?

when i give transport at that time its not shown me ssh how i got it ?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Blue

Re: how i set SSH login on catalyst

mitang.prajapati wrote:

hello ,

i have catalyst 4507r and i want todevloped ssh login of telnet on catalyst

how i do?

when i give transport at that time its not shown me ssh how i got it ?


You will need an IOS image on your switch that supports ssh ie. it will need a "k9" in the image name eg.

cat4500-ipbasek9-mz.122-46.SG.bin

cat4500-enservicesk9-mz.122-46.SG.bin

Jon

9 REPLIES
Hall of Fame Super Blue

Re: how i set SSH login on catalyst

mitang.prajapati wrote:

hello ,

i have catalyst 4507r and i want todevloped ssh login of telnet on catalyst

how i do?

when i give transport at that time its not shown me ssh how i got it ?


You will need an IOS image on your switch that supports ssh ie. it will need a "k9" in the image name eg.

cat4500-ipbasek9-mz.122-46.SG.bin

cat4500-enservicesk9-mz.122-46.SG.bin

Jon

New Member

Re: how i set SSH login on catalyst

yes

i tell you my IOS image is cat4500-entservices-mz.122-37.sg.bin

now tell me what i do and how i configurer the image and SSH services on my catalyst switch

thanks

mitang

Hall of Fame Super Blue

Re: how i set SSH login on catalyst

mitang.prajapati wrote:

yes

i tell you my IOS image is cat4500-entservices-mz.122-37.sg.bin

now tell me what i do and how i configurer the image and SSH services on my catalyst switch

thanks

mitang

Mitang

Your image does not support SSH. You need to upgrade to the crypto image ie.

cat4500-entservicesk9-mz.122-37.sg.bin  <---- note the "k9" in the image name.

Jon

New Member

Re: how i set SSH login on catalyst

hello ,

from where i got IOS of K9 series for catalyst 4507r

Hall of Fame Super Blue

Re: how i set SSH login on catalyst

Mitang

Start from this page. Note that there may be an additional cost for the k9 version, you will need to check with your reseller -

http://tools.cisco.com/support/downloads/go/InterfaceModuleSWT.x?mdfid=277241600&mdfLevel=Model&treeName=Switches&modelName=Cisco%20Catalyst%204507R%20Switch&treeMdfId=268438038

Jon

Purple

Re: how i set SSH login on catalyst

A.  Make sure you are running a crypto image , will usually have a "k9" in the  imagename somewhere.

B. Follow the config instructions in this doc.

http://www.cisco.com/en/US/tech/tk583/tk617/technologies_tech_note09186a00800949e2.shtml

New Member

Re: how i set SSH login on catalyst

in your sheet i cant not found  any thing that which i impliment on my switch

so plz tell me what i do for SSH on catalyst

Re: how i set SSH login on catalyst

New Member

Re: how i set SSH login on catalyst

for  SSH configuration use the following commands.

no ip source-route

no ip gratuitous-arps

username abc123 password cisco123

service password-encryption

ip domain-name yourdomain.com

crypto key generate rsa

ip ssh time-out 120

ip ssh authentication-retries 3

line vty 0 15

transport input ssh

hope to help.

Cheers!!!

Vaib...

2227
Views
5
Helpful
9
Replies
CreatePlease to create content