Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to access 2650XM router using Aux port

Hi all,

i have 2650xm router and i want to access the router using Aux port.

Here is config of aux port

line aux 0
password 7 03005
login
modem InOut
transport input all
flowcontrol hardware
.

Please let me know which cable i need to connect aux port to my Internal modem which is on laptop.

Many thanks

mahesh

1 ACCEPTED SOLUTION

Accepted Solutions

Re: How to access 2650XM router using Aux port

Hi Mahesh,

Genrally your internal modem dials to connect to aux port configration of router,so your configuration at router end matters for AUX port.

check out the below link for detailed aux port configuration and as per your query the diagram explains.

Hope that helps out your query !!

http://www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a0080094bbc.shtml#prereq

Regards

Ganesh.H

4 REPLIES

Re: How to access 2650XM router using Aux port

Hi Mahesh,

Try configure below config for aux port

line aux 0
exec-timeout 0 0
password cisco
modem InOut
transport input all
stopbits 1
speed 38400
flowcontrol hardware
line 1/0 1/7
modem InOut
transport input all
autoselect ppp
flowcontrol hardware

and check out the below link for modem and router connection guide

http://www.cisco.com/warp/public/76/9.pdf

Hope that helps out your query !!

Regards

Ganesh.H

New Member

Re: How to access 2650XM router using Aux port

Hi ganesh,

thanks for reply.

my question is can i user internal modem of laptop  to connect to aux port?

thanks

mahesh

Re: How to access 2650XM router using Aux port

Hi Mahesh,

Genrally your internal modem dials to connect to aux port configration of router,so your configuration at router end matters for AUX port.

check out the below link for detailed aux port configuration and as per your query the diagram explains.

Hope that helps out your query !!

http://www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a0080094bbc.shtml#prereq

Regards

Ganesh.H

New Member

Re: How to access 2650XM router using Aux port

Hi ganesh

many thanks for providing good documentation

mahesh

318
Views
0
Helpful
4
Replies
CreatePlease to create content