Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to change default gateway for LAN subnet?

All,

 

we have uesrs complaining slowness when accessing few urls on internet currently which are routed through mpls  ,now we want to re-direct the traffic from that user subnet and only to certain destination url /ips which are critical to the users to a different internet link terminated on ASA ,can this be done?

Thank You,

Kalyan.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Blue

How to change default gateway for LAN subnet?

Kaylan

If the user vlan is routed on a L3 device before going to either the MPLS router or the firewall you could use PBR on the L3 device (if supported).

But as Reza says, we need more info on your network layout.

Jon

4 REPLIES
VIP Super Bronze

How to change default gateway for LAN subnet?

Hi,

So you have separate Internet connection for one user and that terminates on an ASA?  If yes, you can put the default gateway for that user on the ASA and have it go out that specific connection.

HTH

New Member

How to change default gateway for LAN subnet?

Thanks for replying but i am looking to achieve this in a different way as Jon suggested below.

Hall of Fame Super Blue

How to change default gateway for LAN subnet?

Kaylan

If the user vlan is routed on a L3 device before going to either the MPLS router or the firewall you could use PBR on the L3 device (if supported).

But as Reza says, we need more info on your network layout.

Jon

New Member

How to change default gateway for LAN subnet?

Thanks Jon for replying.

163
Views
0
Helpful
4
Replies
CreatePlease to create content