01-23-2007 01:57 AM - edited 03-05-2019 01:55 PM
Hi
Can anybody tell me ,
what can cmd "show ip cache flow " will give and also how do i can check the current traffic which is flowing on the 6513 switch. (viz source ip, des ip, protocol, portnumber)
Pls let me know
regards
Shashi
01-23-2007 02:05 AM
The " Show ip cac flow" gives the current trafic flow from the router.. this command shows the details such as the Src IP, Dest IP, Src Port, Dest Port, Packet count.. Etc. But to use this command you need to enable the cac flow.
Tapas
01-23-2007 02:09 AM
Hi Tapa,
can u let me know ,on which configuration mode this cmd has to be entered (enableing cac flow), Can use let me know the syntax,
regards
Shashi
01-23-2007 02:09 AM
command show ip cache flow displays a summary of the NetFlow statistics
More info about Netflow
http://www.cisco.com/en/US/tech/tk812/tsd_technology_support_protocol_home.html
http://www.cisco.com/web/about/ciscoitatwork/case_studies/network_management_dl3.html
There is also lot of NetFlow tools
http://www.cisco.com/warp/public/732/Tech/nmp/netflow/partners/commercial/
http://www.cisco.com/warp/public/732/Tech/nmp/netflow/partners/freeware/
M.
01-23-2007 02:18 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide