09-15-2013 03:06 AM - edited 03-07-2019 03:28 PM
I have one DHCP server connect to the cisco switch. Port # 47 connect to DHCP server. Port # 48 connect to Dsl modem, Port # 1 to Port # 46 this ports for employees
How to configuration the switch ?
find below photo
Solved! Go to Solution.
09-15-2013 08:03 AM
If all your PCs are in the same subnet as the DHCP server, you don't need a helper address. The DHCP should assign IPs to hosts (as long as you have the correct scope configured on the DHCP server).
HTH
09-15-2013 10:05 AM
Hi.
All pc should be also in the same VLAN of DHCP server.
HTH
Regards
Carlo
Sent from Cisco Technical Support iPhone App
09-15-2013 08:03 AM
If all your PCs are in the same subnet as the DHCP server, you don't need a helper address. The DHCP should assign IPs to hosts (as long as you have the correct scope configured on the DHCP server).
HTH
09-15-2013 10:05 AM
Hi.
All pc should be also in the same VLAN of DHCP server.
HTH
Regards
Carlo
Sent from Cisco Technical Support iPhone App
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: