Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

How to configuration Cisco switch connect dhcp server?

I have one DHCP server connect to the cisco switch. Port # 47 connect to DHCP server. Port # 48 connect to Dsl modem, Port # 1 to Port # 46 this ports for employees

How to configuration  the switch ?

find  below photo

qw.png

2 ACCEPTED SOLUTIONS

Accepted Solutions
VIP Super Bronze

How to configuration Cisco switch connect dhcp server?

If all your PCs are in the same subnet as the DHCP server, you don't need a helper address. The DHCP should assign IPs to hosts (as long as you have the correct scope configured on the DHCP server).

HTH

Re: How to configuration Cisco switch connect dhcp server?

Hi.
All pc should be also in the same VLAN of DHCP server.

HTH
Regards
Carlo

Sent from Cisco Technical Support iPhone App

Please rate all helpful posts "The more you help the more you learn"
2 REPLIES
VIP Super Bronze

How to configuration Cisco switch connect dhcp server?

If all your PCs are in the same subnet as the DHCP server, you don't need a helper address. The DHCP should assign IPs to hosts (as long as you have the correct scope configured on the DHCP server).

HTH

Re: How to configuration Cisco switch connect dhcp server?

Hi.
All pc should be also in the same VLAN of DHCP server.

HTH
Regards
Carlo

Sent from Cisco Technical Support iPhone App

Please rate all helpful posts "The more you help the more you learn"
1527
Views
0
Helpful
2
Replies
CreatePlease to create content