Hi
I hope someone can help me. I've got a 3640 router that has the following config
interface FastEthernet0/0
ip address 10.11.8.2 255.255.248.0
no ip redirects
ip route-cache same-interface
ip route-cache flow
no ip mroute-cache
speed 100
full-duplex
standby 1 timers 5 15
standby 1 preempt
standby 1 authentication xxxxx
standby 1 ip 10.11.8.1
!
interface FastEthernet0/1
ip address 10.29.2.2 255.255.255.0
no ip redirects
ip route-cache flow
speed 100
full-duplex
!
router ospf 1
router-id 10.11.8.1
log-adjacency-changes
redistribute connected subnets route-map PRIVONLY
redistribute static subnets
redistribute rip metric 120
network 10.11.8.0 0.0.7.255 area 0
network 10.17.2.0 0.0.0.255 area 0
network 10.29.2.0 0.0.0.255 area 0
default-information originate
!
router rip
version 2
redistribute ospf 1
network 0.0.0.0
default-metric 30
!
What I'd like to do is create a new VLAN on the same connection that is coming off of fa 0/0 so instead of just 10.11.8.0/21 I want to have a 10.32.0.0/16.
My question is how can I change the above config to accomodate a new vlan? I think I need to create subinterfaces, but I was worried about what it might affect given the above config. Also on the switch port do I need to convert the port to a trunk link?
Thanks in advance
Dan