Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

How to configure one serial interface configuration to another serial inter

I m having cisco 2600 router.. I want to change s1/0 interafce configuration to s1/1.. How to make it..

3 REPLIES

Re: How to configure one serial interface configuration to anoth

Hi Vinoth

You can copy the config commands under the serial 1/0 and paste the same onto the s1/1.

Make sure that you have identical config lines before shifting the actual physical link onto the new port.

Once you are connected and find the link working remove the config under s1/0.

Also make sure that you have backed up the config of the whole router before doing any activity.

do check out for any routing statements pointing via the s1/0 interface.if yes do change it accordingly via s1/1.

regds

New Member

Re: How to configure one serial interface configuration to anoth

From which mode i have to copy from...

Re: How to configure one serial interface configuration to anoth

Hi Vinoth

you can copy the config parameters from the telnet session itself.

regds

117
Views
5
Helpful
3
Replies
CreatePlease to create content