Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

How to configure VRF-Lite on Cisco 4500-X

Hi,

I've got two cisco 4500-X that I use in VSS mode. I'm trying to configure VRF-Lite but when I enter "ip vrf VRF1" in conf term mode, I get this :

"% Feature is no supported"

Does anyone have a solution ?

Thank you !

P.S. my IOS version is 3.04.04.SG ipbase

1 ACCEPTED SOLUTION

Accepted Solutions

Hi,I guess you'll need the

Hi,

I guess you'll need the Enterprise Services image.

Link: Release Notes for the Catalyst 4500X Switch, Cisco IOS XE 3.4.xSG

"The Enterprise Services image supports all Cisco Catalyst 4500-X Series software features based on Cisco IOS Software, including enhanced routing.

(...)

The IP Base image does not support enhanced routing features such as BGP, Intermediate System-to-Intermediate System (IS-IS), Internetwork Packet Exchange (IPX), AppleTalk, Virtual Routing Forwarding (VRF-lite), and policy-based routing (PBR)."

 

HTH

Rolf

1 REPLY

Hi,I guess you'll need the

Hi,

I guess you'll need the Enterprise Services image.

Link: Release Notes for the Catalyst 4500X Switch, Cisco IOS XE 3.4.xSG

"The Enterprise Services image supports all Cisco Catalyst 4500-X Series software features based on Cisco IOS Software, including enhanced routing.

(...)

The IP Base image does not support enhanced routing features such as BGP, Intermediate System-to-Intermediate System (IS-IS), Internetwork Packet Exchange (IPX), AppleTalk, Virtual Routing Forwarding (VRF-lite), and policy-based routing (PBR)."

 

HTH

Rolf

1689
Views
0
Helpful
1
Replies
CreatePlease to create content