05-17-2010 12:10 PM - edited 03-06-2019 11:08 AM
Hello,
I would like to connect my CISCO 2621 to my CISCO WRT610N ROUTER that is connected to my Internet Service Provider.
I have internet on my CISCO WRT610N , but I would like to pass it true my CISCO 2621 , I have been reading the 2 BIG books from the CCNA , but the only thing I can do is pinging the CISCO WRT610N , when I try to ping or go to a external internet page (ex www.google.com) , it does not work.
Where can I find some examples on NAT and RIP or other things that can maybe help me.
I have just order a Cisco WIC-1DSU-T1 1-Port T1/Fractional T1 DSU/CSU WAN on eBAY , maybe what I try to do on F0/0 or F0/1 does not work ?
When I understand and are able to make it work , I would like to remove the CISCO WRT610 ROUTER and use the CISCO 2621 instead in my small lab.
Thank you for your help.
Best Regards,
Didier.
Solved! Go to Solution.
05-17-2010 10:10 PM
Hello,
Thank you for your prompt reply
It seams I have no access to the above links , I will contact CISCO today , to update my profile / account.
But so far I can see this will be the place where I will find what I need.
Thank You again,
Best Regards,
Didier
Hi Didier,
Check out the below link for NAT and RIP/EIGRP configuration on Cisco routers
http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080094e77.shtml
http://www.tomax7.com/mcse/cisco_routerconfig.htm
Hope to Help !!
Ganesh.H
05-17-2010 05:07 PM
Sample Configuration Using the ip nat outside source list Command
http://www.cisco.com/en/US/customer/tech/tk648/tk361/technologies_configuration_example09186a0080093f8e.shtml
Sample Configuration Using the ip nat outside source static Command
http://www.cisco.com/en/US/customer/tech/tk648/tk361/technologies_configuration_example09186a0080093f2f.shtml
Configuring Routing Information Protocol
http://www.cisco.com/en/US/customer/docs/ios/12_2/ip/configuration/guide/1cfrip.html
Don't forget to rate useful posts. Thanks.
05-17-2010 10:07 PM
Hello,
Thank you for your prompt reply
It seams I have no access to the above links , I will contact CISCO today , to update my profile / account.
But so far I can see this will be the place where I will find what I need.
Thank You again,
Best Regards,
Didier
05-17-2010 10:10 PM
Hello,
Thank you for your prompt reply
It seams I have no access to the above links , I will contact CISCO today , to update my profile / account.
But so far I can see this will be the place where I will find what I need.
Thank You again,
Best Regards,
Didier
Hi Didier,
Check out the below link for NAT and RIP/EIGRP configuration on Cisco routers
http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080094e77.shtml
http://www.tomax7.com/mcse/cisco_routerconfig.htm
Hope to Help !!
Ganesh.H
05-18-2010 11:28 AM
Hi Ganesh,
Thank you for this links , this one I can open
The second one is really interesting , I will try it this evening when I am back home.
Thank's again and Best Regards,
Didier
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: