Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

how to create the ACL

how to create the access list in the cisco 2811 and how to activate the acl

1 REPLY
New Member

Re: how to create the ACL

Because the Cisco IOS Firewall uses Cisco IOS access control lists (ACLs) as the first line of defense on packets entering the router, if logging is enabled on an interface ACL entry that is permitting packets to get to the firewall, you may see that a packet is logged as being allowed. This log message can be ignored and for the disposition of the packet by the firewall, you should look for a subsequent log message displayed by the firewall.

To see the packets that are dropped by the firewall, the ip inspect log drop-pkt command must be enabled.

This URL should help you:

http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_feature_guide09186a008028b448.html

397
Views
0
Helpful
1
Replies