Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

How to determine feature set given the show version

Hi friends,

I was trying to find out the feature set from the show version output of 6500 Native IOS with MSFC3/PFC3 but its confusing as the same system image file can be advanced services or ip services image. Can you please help me find out

from the show version output below:

Cisco Internetwork Operating System Software

IOS (tm) s72033_rp Software (s72033_rp-PK9SV-M), Version 12.2(17d)SXB8, RELEASE

SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2005 by cisco Systems, Inc.

Compiled Fri 29-Apr-05 05:50 by alnguyen

Image text-base: 0x40020FBC, data-base: 0x41F10000

ROM: System Bootstrap, Version 12.2(17r)S2, RELEASE SOFTWARE (fc1)

BOOTLDR: s72033_rp Software (s72033_rp-PK9SV-M), Version 12.2(17d)SXB8, RELEASE

SOFTWARE (fc2)

AG-CORE-A uptime is 21 weeks, 4 days, 20 hours, 58 minutes

Time since AG-CORE-A switched to active is 21 weeks, 4 days, 20 hours, 57 minute

s

System returned to ROM by unknown reload cause - suspect boot_data[BOOT_COUNT] 0

x0, BOOT_COUNT 0, BOOTDATA 19 (SP by power-on)

System image file is "sup-bootflash:s72033-pk9sv-mz.122-17d.SXB8.bin"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

cisco WS-C6513 (R7000) processor (revision 1.0) with 458752K/65536K bytes of mem

ory.

Processor board ID SAL0918ADDK

SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache

Last reset from power-on

X.25 software, Version 3.0.0.

Bridging software.

28 Virtual Ethernet/IEEE 802.3 interface(s)

148 Gigabit Ethernet/IEEE 802.3 interface(s)

1917K bytes of non-volatile configuration memory.

8192K bytes of packet buffer memory.

65536K bytes of Flash internal SIMM (Sector size 512K).

Standby is up

Standby has 458752K/65536K bytes of memory.

Configuration register is 0x2102

7 REPLIES
New Member

Re: How to determine feature set given the show version

Hi,

Using the well-known Feature Navigator:

www.cisco.com/go/fn

Stuff in your IOS = s72033-pk9sv-mz.122-17d.SXB8.bin

Then you will find what feature set are there ..

HTH,

lP

New Member

Re: How to determine feature set given the show version

Thanks for the reply. But i see that there are two feature sets (Advanced IP W and IP W).

Is there a way where we can come to know which one exactly is installed?

New Member

Re: How to determine feature set given the show version

Hi gautamzone,

(please rate)

you can find the Features through http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp.

go by "Search by Platform "

Hall of Fame Super Silver

Re: How to determine feature set given the show version

I wonder if either of the people who suggested using the feature navigator actually tried it with the image name that GAUTAM gets from his switch. I tried it and was amazed to discover that the Feature Navigator gave 2 feature sets based on that image name. I have not seen it do that before. But it certainly complicates the effort to determine which feature set.

I wonder if you could go into the Feature Navigator and use the option to compare two images, select the same version number and select the 2 feature sets. The comparison should show some features that are unique to one (or perhaps some features that are unique to each) of the feature sets. He then could check to see which features are actually supported on his switch.

Or maybe this is an issue on which to open a case with Cisco TAC (assuming that the switch is covered by a maintenance contract).

HTH

Rick

Cisco Employee

Re: How to determine feature set given the show version

I compared the two and both the images have the same features, file size, BSD Checksum, Router Checksum, MD5 values. So, bascially its the same file mentioned with two different feature set names. No matter which one you click on, the same file would get downloaded.

HTH

~Vaibhav

Cisco Employee

Re: How to determine feature set given the show version

Found some more information on this. The binaries are the same between the two images. The difference is that

ADV IP W/MPLS/IPV6/SSH/3DES + BGP includes the license, hence support for MPLS and IPv6.

HTH,

~Vaibhav

New Member

Re: How to determine feature set given the show version

It would spoiled the fun of learning, woundn' t it ?

Take for granted, feature navigator is nowhere near the benchmark! but that is Cisco issue.

Peace,

lP

1368
Views
0
Helpful
7
Replies