Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

How to disable dhcp pool

Hi,

Can you confirm that if I want to disable temporarily a dhcp pool on a 4500, I need just to shutdown the interface VLAN corresponding to a specific dhcp pool?

ip dhcp pool test

   network 10.X.27.0 255.255.255.0

   default-router 10.15.27.250

   domain-name test

!

interface Vlan200

ip address 10.15.27.250 255.255.255.0

shutdown

Thanks and regards,

Vin

Everyone's tags (4)
1 ACCEPTED SOLUTION

Accepted Solutions
Gold

Re: How to disable dhcp pool

Hi,

Yes, shutting down the vlan interface (SVI) or removing its up address, causes the switch to lose the VLAN's L3 up status, so simply DHCP wont work for that specific vlan.

plz Rate if it helped.

Soroush.

Hope it Helps!

Soroush.
3 REPLIES
Gold

Re: How to disable dhcp pool

Hi,

Yes, shutting down the vlan interface (SVI) or removing its up address, causes the switch to lose the VLAN's L3 up status, so simply DHCP wont work for that specific vlan.

plz Rate if it helped.

Soroush.

Hope it Helps!

Soroush.
New Member

How to disable dhcp pool

Ok thanks Soroush!

Hall of Fame Super Gold

How to disable dhcp pool

Command:  no ip dhcp pool test

If you shutdown the interface and you need to manage the appliance using the same VLAN it is not possible. 

12099
Views
9
Helpful
3
Replies
CreatePlease to create content