Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to enable LLDP on Cisco Catalyst 6500?

Hi All.

How to enable LLDP on Cisco Catalyst 6500?; enable this feature has an impact?

 

Thank you. 

 

2 ACCEPTED SOLUTIONS

Accepted Solutions

Hey,Its enabled by default.

Hey,

Its enabled by default. check the link below:

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6500/ios/12-2SX/configuration/guide/book/power_over_ethernet.html#wp1116393

HTH.

Regards,

RS.

Hey,Configure "lldp run"

Hey,

Configure "lldp run" command in global configuration mode to enable it. And i don't believe there are any impacts enabling this feature unless you have too may PoE devices using lldp and less power available in PS unit.

HTH.

Regards,

RS.

4 REPLIES

Hey,Its enabled by default.

Hey,

Its enabled by default. check the link below:

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6500/ios/12-2SX/configuration/guide/book/power_over_ethernet.html#wp1116393

HTH.

Regards,

RS.

New Member

Hi Rajeevsh. My switch has

Hi Rajeevsh.

 

My switch has disable the lldp:

CORE#show lldp neighbors
% LLDP is not enabled

 

 if i enable this feature has an impact?

 

 

Thank you.

Hey,Configure "lldp run"

Hey,

Configure "lldp run" command in global configuration mode to enable it. And i don't believe there are any impacts enabling this feature unless you have too may PoE devices using lldp and less power available in PS unit.

HTH.

Regards,

RS.

New Member

Hi Rajeevsh. My switch has

Hi Rajeevsh.

 

My switch has disable the lldp:

CORE#show lldp neighbors
% LLDP is not enabled

 

 if i enable this feature has an impact?

 

 

Thank you.

 

1339
Views
0
Helpful
4
Replies
CreatePlease login to create content