10-27-2009 11:55 AM - edited 03-06-2019 08:19 AM
Hi All,
how to enable VPN between these router and allow through PIX?
Site I : T1
Router Cisco 1721
Firewall CISCO PIX 506e
Site II : T1
Cisco 1721
Firewall PIX506e
Site III: Bonded T1
Router :CISCO 12651
Firewall: Cisco PIX 515r
Thank you,
Siva
10-28-2009 08:23 AM
hello Siva,
you should provide more details:
there is a central site and two point-to-point VPN one to site 1 and one to site2?
And where the VPN are terminated on the PIXs on or internal routers?
I guess on PIXs
pix hub and spoke
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080093bd3.shtml
full mesh of IPsec tunnels on 3 PIXs
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00800a2cce.shtml
Hope to help
Giuseppe
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Log in to Community