09-19-2010 08:50 PM - edited 03-06-2019 01:03 PM
Hi all,
Does anyone know how to enable WS-C4507R-E web management?
Usually I will download .Tar image which has html file on it and I will configure the ip http path to point to it. I will also configure ip http server, authentication local....etc and Thats it!
But as for C4507R-E, I can;t find .tar image file.
So how can I enable web management on a C4506???
Thanks in advance
Regards
Ryan
Solved! Go to Solution.
09-21-2010 03:45 AM
Ryan
As far as i know the 4500 like the 6500 doesn't support the same setup as the 3560/3750 switches ie. you don't get a .tar file which expands into a directory for the 4500/6500.
You can use Cisco Network Assistant to configure the 4500. You will need to download the software for this separately as it doesn't come bundled with the IOS. Attached is a link to configuring CNA for the 4500 -
You can download Network Assistant, which is free, from this link (note this link is also at the start of the doc above) -
Jon
09-20-2010 09:30 PM
Hi All,
Anyone has any idea on how to enable and access C4507 web console??
Thanks
Regards
Ryan
09-21-2010 03:45 AM
Ryan
As far as i know the 4500 like the 6500 doesn't support the same setup as the 3560/3750 switches ie. you don't get a .tar file which expands into a directory for the 4500/6500.
You can use Cisco Network Assistant to configure the 4500. You will need to download the software for this separately as it doesn't come bundled with the IOS. Attached is a link to configuring CNA for the 4500 -
You can download Network Assistant, which is free, from this link (note this link is also at the start of the doc above) -
Jon
09-22-2010 05:17 AM
Hi Jon,
You are absoutely correct!!! Thanks alot!! I just tried CNA yesterday... it worked fine.
Thanks very much!!!
Regards
Ryan Ho
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: