Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to enable WS-C4507R-E web management

Hi all,

Does anyone know how to enable WS-C4507R-E web management?

Usually I will download .Tar image which has html file on it and I will configure the ip http path to point to it. I will also configure ip http server, authentication local....etc and Thats it!

But as for C4507R-E, I can;t find .tar image file.

So how can I enable web management on a C4506???

Thanks in advance

Regards

Ryan

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Blue

Re: How to enable WS-C4507R-E web management

Ryan

As far as i know the 4500 like the 6500 doesn't support the same setup as the 3560/3750 switches ie. you don't get a .tar file which expands into a directory for the 4500/6500.

You can use Cisco Network Assistant to configure the 4500. You will need to download the software for this separately as it doesn't come bundled with the IOS. Attached is a link to configuring CNA for the 4500 -

http://www.ciscosystems.com/en/US/docs/switches/lan/catalyst4500/12.2/25ewa/configuration/guide/netasist.html

You can download Network Assistant, which is free, from this link (note this link is also at the start of the doc above)  -

CNA  

Jon

3 REPLIES
New Member

Re: How to enable WS-C4507R-E web management

Hi All,

Anyone has any idea on how to enable and access C4507 web console??

Thanks

Regards

Ryan

Hall of Fame Super Blue

Re: How to enable WS-C4507R-E web management

Ryan

As far as i know the 4500 like the 6500 doesn't support the same setup as the 3560/3750 switches ie. you don't get a .tar file which expands into a directory for the 4500/6500.

You can use Cisco Network Assistant to configure the 4500. You will need to download the software for this separately as it doesn't come bundled with the IOS. Attached is a link to configuring CNA for the 4500 -

http://www.ciscosystems.com/en/US/docs/switches/lan/catalyst4500/12.2/25ewa/configuration/guide/netasist.html

You can download Network Assistant, which is free, from this link (note this link is also at the start of the doc above)  -

CNA  

Jon

New Member

Re: How to enable WS-C4507R-E web management

Hi Jon,

You are absoutely correct!!! Thanks alot!! I just tried CNA yesterday... it worked fine.

Thanks very much!!!

Regards

Ryan Ho

1079
Views
0
Helpful
3
Replies