Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

how to exit From Rxboot exe mode in cisco 2511 router

hello friends

My Cisco 2509 access server was working fine until yesterday when l turn it on. it when into the BxBoot mode and cant get out of it. can anyone help please

thank.

1 ACCEPTED SOLUTION

Accepted Solutions
Green

Hi, Can you try folowing this

Hi,

 

Can you try folowing this link as it starts with the > prompt just like you have explained.

 

http://www.cisco.com/c/en/us/support/docs/routers/2500-series-routers/15078-recovery-c2500.html

 

Regards

Alex

Regards, Alex. Please rate useful posts.
4 REPLIES
Green

Hi,This sounds like your IOS

Hi,

This sounds like your IOS iage in yor flash is corrupt

The RXBoot image offer some support for tftp etc
so you should be able to renew your flash IOS.

Have a read at this link:-
http://www.cisco.com/c/en/us/support/docs/routers/2500-series-routers/10252-13.html

Regards
Alex

Regards, Alex. Please rate useful posts.
New Member

helllothanks for the link,

helllo

thanks for the link, but it does not allow me to use the copy tftp to flash although l can ping the tftp server there is no command to copy etc.

if l first connect to CLI  l can only see ">" if l press "?" "Image1 "  is the list of commands . if l press "B" then it will take me to the Rxboot (images 2)and allow me to login, but cannnot do anything. please take a look at the images 343.txt

thanks

Green

Hi, Can you try folowing this

Hi,

 

Can you try folowing this link as it starts with the > prompt just like you have explained.

 

http://www.cisco.com/c/en/us/support/docs/routers/2500-series-routers/15078-recovery-c2500.html

 

Regards

Alex

Regards, Alex. Please rate useful posts.
New Member

hello Acampbelljust this two

hello Acampbell

just this two command and it works just fine was able to come out of the Rxboot exe mode.

thanks.

74
Views
10
Helpful
4
Replies