Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Gold

How to find out checksum on a ios image on a 3750 ?

Does anyone know how to find out the checksum on a downloaded ios image on a 3750 switch ?

ie I used tftp to download a new ios image and now I want to check the checksum on the file located on the flash.

6 REPLIES

Re: How to find out checksum on a ios image on a 3750 ?

7206VXR#verify disk2:/c7200p-advsecurityk9-mz.124-15.T5.bin

Verifying file integrity of disk2:/c7200p-advsecurityk9-mz.124-15.T5.bin

.............................................

.............................................

.............................................

.............................................

.............................................

........................................Done!

Embedded Hash MD5 : 8DF4B6E5EAC416467CFDB5E25699BBF5

Computed Hash MD5 : 8DF4B6E5EAC416467CFDB5E25699BBF5

CCO Hash MD5 : 00215BB6C762990B22533ED8652F6754

Embedded hash verification successful.

Hope that helps

Gold

Re: How to find out checksum on a ios image on a 3750 ?

The command is possible to write this way in the 3750, however if i do that on the current version (12.2.46-se) it can not find the file specified, however if i add /md5 in the correct place then it works like a charm. seems to me there is a bug in the verify command on this version for the 3750.

Thank you very much for your input. it was most helpful.

Re: How to find out checksum on a ios image on a 3750 ?

IOS across routers/switches/firewall/ACEs/etc can differ slightly in their commands. Edison was spot on with the /md5.

Gold

Re: How to find out checksum on a ios image on a 3750 ?

Yes he was but you where close enough :-)

Thank you all.

Hall of Fame Super Bronze

Re: How to find out checksum on a ios image on a 3750 ?

You can verify the file from the switch with the command:

verify /md5 flash:[filename]

From the workstation, the answer depends on the OS running on the system. In Windows, there are tools such as winMD5Sum and if you have *Nix, please see: http://www.cyberciti.biz/tips/howto-verify-integrity-of-the-tar-balls-with-md5sum-command.html

HTH,

__

Edison.

Gold

Re: How to find out checksum on a ios image on a 3750 ?

Works like a charm.

it was in the switch, I needed to check it out after a series of 0 in the tftp transfer.

Thank you very much for your swift inpuut.

1236
Views
0
Helpful
6
Replies