Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to find out who made the last CONFIG change on a CAT 6509

Hi All,

How do I find out who made the last configuration change on a 6509 CAT switch with the following Show VER

WS-C6509 Software, Version NmpSW: 8.5(9)

Copyright (c) 1995-2007 by Cisco Systems

NMP S/W compiled on Apr 16 2007, 21:23:23

System Bootstrap Version: 7.1(1)

System Boot Image File is 'bootflash:cat6000-sup2k8.8-5-9.bin'

System Configuration register is 0x2102

Hardware Version: 3.0  Model: WS-C6509  Serial #: xxxxxxxxxx

PS1  Module: WS-CAC-4000W-US Serial #: xxxxxxxxx

PS2  Module: WS-CAC-4000W-US Serial #: xxxxxxxxx

Thanks,

Dan Lee

Everyone's tags (7)
5 REPLIES
Silver

How to find out who made the last CONFIG change on a CAT 6509

Do you have any kind of logging (Notifications (5) and above) enabled  on the device, if so you can find that out in logs. Below is an example  log message

Jul 17 2012 10:28:10.111 CST: %SYS-5-CONFIG_I: Configured from console by siddhartha on vty0 (10.0.X.X)

If you have NTP running on your switch, sh run command will also show you who made the last config change

! NVRAM config last updated at 12:11:42 CST Wed Jul 11 2012 by siddhartha

Siddhartha

Siddhartha
Hall of Fame Super Gold

Re: How to find out who made the last CONFIG change on a CAT 650

Do a "sh run".  Look at the first three lines. 

Switch#sh run

Building configuration...

Current configuration : 13407 bytes

!

! Last configuration change at 12:15:45 AEST Tue Jul 17 2012 by BLAH

! NVRAM config last updated at 12:15:45 AEST Tue Jul 17 2012 by BLAH

!

version 12.2

New Member

How to find out who made the last CONFIG change on a CAT 6509

Hi,

I apologize for not being clear.  The 6509 is a set command switch, not an IOS switch.  I need to quickly find out the last person who made the last CONFIG change without looking at the log.

Purple

How to find out who made the last CONFIG change on a CAT 6509

  Try "show logg buff 1000   or "show config all " and see if that tells you .

New Member

How to find out who made the last CONFIG change on a CAT 6509

show log buff 1000 and show config all are not valid show command in the 6509 set command switch

xxxxxxxx> (enable) sh log buff 1000

Usage: show log [mod]

       show log command [mod]

xxxxxxxx> (enable) sh config all

Command option not allowed in text configuration mode.

Usage: show config

       show config checkpoints

       show config differences [ignorecase|context [val]] all

       show config differences [ignorecase|context [val]] []

       show config mode

xxxxxxxx> (enable) sh log buff 1000

Usage: show log [mod]

       show log command [mod]

xxxxxxxx> (enable) sh config all

Command option not allowed in text configuration mode.

Usage: show config

       show config checkpoints

       show config differences [ignorecase|context [val]] all

       show config differences [ignorecase|context [val]] []

       show config mode

9301
Views
0
Helpful
5
Replies
CreatePlease login to create content