Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to flush / renew hosts table in a 3750 switch stack?

I have swapped IP addresses between hosts space-s and apollo7-s on DNS servers. Only 3750 insist on old values in its hosts table. There is not possible to ping apollo7-s from 3750 by name. It is possible by number only.

ss-s01-1#sh hosts

Default domain is fzu.cz

Name/address lookup uses domain service

Name servers are 147.231.26.154, 147.231.126.127

...

Host Port Flags Age Type Address(es)

...

space-s.fzu.cz None (temp, OK) 17 IP 10.26.202.33

apollo7-s.fzu.cz None (temp, OK) 0 IP 10.26.202.30

! Old values ^^^^

...

ss-s01-1#sh ver

Cisco IOS Software, C3750 Software (C3750-IPBASEK9-M), Version 12.2(25)SEE2, RELEASE SOFTWARE (fc1)

ss-a2p7#sh hosts

Default domain is fzu.cz

Name/address lookup uses domain service

Name servers are 147.231.26.154, 147.231.126.127

...

Host Port Flags Age Type Address(es)

...

apollo7-s.fzu.cz None (temp, OK) 0 IP 10.26.202.33

! New value ^^^^ (IP ...30 is not working at present)^^.

Thanks,

Tomas

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: How to flush / renew hosts table in a 3750 switch stack?

Try clear host {name | *} command to remove one or all entries from the hostname and the address cache.

1 REPLY
Silver

Re: How to flush / renew hosts table in a 3750 switch stack?

Try clear host {name | *} command to remove one or all entries from the hostname and the address cache.

346
Views
0
Helpful
1
Replies
CreatePlease login to create content