Re: How to force a CatOS Sup2 to sync config to standby sup and
On the online MSFC, to erase the config do a switch console 15 then do a write erase and reload. This will wipe out the config. As for the standby MSFC. Do a switch console 16 and do the same commands to wipe it out. To set redundancy on your MSFC's follow the attached document. It should assist you....Please rate..
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...