How to force one router to be igmp snooping querier "master"?
I have two 6513 switches connected over a L2 trunk. Each switch has an SVI for the same subnet and HSRP configured with one switch being the active and the other standby. Both switches has the command " ip igmp snooping querier" configured on the SVI.
When I run the "show ip igmp snooping mrouter" command on the primary switch I the the answer that the mrouter resides on the trunking port connected to the standby switch. When I run the same command on the secondary switch I get the answer that the "switch" is the mrouter.
My question is this;
Is this "election" of igmp snooping querier mrouter a random process or something that can be managed? I.E. can I set the primary switch to be the snooping querier mrouter "master"?
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...