Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to identify Cisco 2611XM Router

Hi All,

I bought a Cisco router which I belived to be a 2611XM router. Could someone tell me how to figure it out if this router is a 2611XM or not from the output of the "show ver" command?

What do I look out for in the show version command that would tell me that this router is a 2611XM?

Thank you.

2 REPLIES
Purple

Re: How to identify Cisco 2611XM Router

Should say right in the show version that it is a 2611xm , if only says 2611 then its not a XM .

Cisco Employee

Re: How to identify Cisco 2611XM Router

Hi,

Below is the "show version" output from a 2611xm. I hope it helps.

2600#sh ver

Cisco Internetwork Operating System Software

IOS (tm) C2600 Software (C2600-IS-M), Version 12.2(40), RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2006 by cisco Systems, Inc.

Compiled Thu 12-Oct-06 21:01 by pwade

Image text-base: 0x8000808C, data-base: 0x8111D524

ROM: System Bootstrap, Version 12.2(7r) [cmong 7r], RELEASE SOFTWARE (fc1)

chi-2600-8 uptime is 22 weeks, 1 day, 12 hours, 50 minutes

System returned to ROM by reload

System image file is "flash:c2600-is-mz.122-40.bin"

cisco 2611XM (MPC860P) processor (revision 0x100) with 93184K/5120K bytes of mem

ory.

M860 processor: part number 5, mask 2

Bridging software.

X.25 software, Version 3.0.0.

2 FastEthernet/IEEE 802.3 interface(s)

2 Low-speed serial(sync/async) network interface(s)

32K bytes of non-volatile configuration memory.

49152K bytes of processor board System flash (Read/Write)

Regards,

Arul

245
Views
0
Helpful
2
Replies