Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

How to instal and Configure a Catalyst 3509-e switch

Good Day Learned Ones, My name is Akinbayo Oluwunmi.I am on Industrial Training, and i have a task of Installing and Configuring a Cisco Catalyst 6509-e Switch and i want to understand the configuration procedure but i don't have documents to study for the configurations, experts can you help me out. I only know right now that Programming this kind of switch is in "set" class.

you can forward response to my mails:

oluy2k4@yahoo.com

pmapengo@gmail.com

Thank you

2 REPLIES

Re: How to instal and Configure a Catalyst 3509-e switch

Here's the link to Catalyst 6500 product documentation page and configuration guide.

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/index.htm

Software Configuration Guide:

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/122sx/swcg/index.htm

HTH

Sundar

Re: How to instal and Configure a Catalyst 3509-e switch

reference this link, download the pdf file

which contains most if not all commands for the set base switches .

http://www.cisco.com/en/US/products/hw/switches/ps708/products_command_reference_book09186a00801e8ba1.html

will this be the only switch install, is there already a network setup where you need to install the switch.

could you post the type of suppervisor engine and any relevant cards used etc..

also refere this link for disign guidelines .

http://www.cisco.com/en/US/products/hw/switches/ps708/tsd_products_support_series_home.html

HTH

Jorge

624
Views
0
Helpful
2
Replies
CreatePlease to create content