Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Cisco Support Community site will be in read only mode on Dec14, 2017 from 12:01am PST to 11:30am for standard maintenance. Sorry for the inconvenience.

New Member

How to know if shaping is 'active' on a 7604 interface?

In a 7206-VXR/NP-G1 with shaping on an interface, there is a 'Shaping Active' field that reads 'no' or 'yes' depending if shaping is occurring. When 'active' the packets delayed and bytes delayed counters work also.

example:

GigabitEthernet0/3.82

Service-policy output: WAN-100MB-speed_with_10MB_voice

Class-map: class-default (match-any)

914452179 packets, 197638327821 bytes

30 second offered rate 252000 bps, drop rate 0 bps

Match: any

Traffic Shaping

Target/Average Byte Sustain Excess Interval Increment

Rate Limit bits/int bits/int (ms) (bytes)

99920000/99920000 624500 2498000 2498000 25 312250

Adapt Queue Packets Bytes Packets Bytes Shaping

Active Depth Delayed Delayed Active

- 0 914452475 69931741 0 0 no

However, in a 7604 with a shaping policy applied to a 2xGE SPA gig interface, there is no 'active' shaping indicator.

example:

GigabitEthernet2/1/1.82

Service-policy output: WAN-100MB-speed_with_10MB_voice

Counters last updated 00:00:10 ago

Class-map: class-default (match-any)

485362917 packets, 109753594669 bytes

30 second offered rate 3721000 bps, drop rate 0 bps

Match: any

Queueing

queue limit 24980 packets

(queue depth/total drops/no-buffer drops) 0/0/0

(pkts output/bytes output) 485355796/109751981653

shape (average) cir 99920000, bc 399680, be 399680

target shape rate 99920000

Service-policy : QOS_classes_6Video_110voice

Counters last updated 00:00:10 ago

queue stats for all priority classes:

Queueing

queue limit 2500 packets

(queue depth/total drops/no-buffer drops) 0/0/0

(pkts output/bytes output) 470937881/101388419100

In the 7604 how does one tell if shaping is occurring an a particular moment like in the 7206?

1 REPLY
Bronze

Re: How to know if shaping is 'active' on a 7604 interface?

718
Views
0
Helpful
1
Replies
CreatePlease to create content