How to know the feature set and the last ios for a switch
The customer has an old catalyst 5500, and wishes to do an upgrade to the last version, but I was not able to find what is the feature set that he can download the ios. The show version displays the following:
Cisco Internetwork Operating System Software
IOS (tm) C5RSM Software (C5RSM-DSV-M), Version 12.0(28b), RELEASE SOFTWARE (fc1)
Re: How to know the feature set and the last ios for a switch
Everything depends on how much dram you have on both the RSM card also the supervisor card. If you have enough dram on the supervisor the last version is 6.4.23a (64 meg dram). For the RSM if you have enough dram then 12.2.46a was the last code (64 meg dram).
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...