10-22-2010 01:40 AM - edited 03-06-2019 01:41 PM
Good day,
I have a network with multicast (pim sparse mode). My network topology is made up for stations transmitin multicast video towards the Data Centre. Actually the multicast goes just in one way, I mean, from the remote stations to the Data Centre. My problem is that I have one application in the Data Centre that needs to use multicast towards the stations, that means that my originally receiver becomes a new active multicast source, so I need to define the multicast in the routers upstream as well. How could I do this?
Thank you very much in advance,
Best regards,
Alberto
10-27-2010 03:20 AM
Hi Alberto,
are remote stations > datacentre layer 3 ?
you say you have pim sparse mode multicast network already , do you have static RP or Auto RP?
For starters you will need to put pim sparse mode on Data centre interface , so that the router knows that the multicat stream exists in mroute table
could you give us bit more details on your current multicast set up
Many thanks
10-28-2010 07:25 AM
Solved...
Thank you
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: