Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

How to make a port on the router static

Hello,

My current Cisco Router 1812 configs. are as:

1. My DSL connects to the FE0 port.

2. My ports FE2-FE9 are automatically assigned IP addresses via the DHCP server from VLAN 1.

What I want to do is stay on the same vlan but assign my printer which is hooked up to my FE2 port a static IP how do I go about doing this.

3 REPLIES
Cisco Employee

Re: How to make a port on the router static

Community Member

Re: How to make a port on the router static

I dont know i set everything up via SDM so it was easy to configure.

Cisco Employee

Re: How to make a port on the router static

Hi,

Under SDM -> DHCP, you should see "DHCP Bindings". You can configure MAC address and IP address mapping manually.

Make sure the "Identifier" is Hardware address

and "Type" is IEEE 802.

HTH,

jerry

120
Views
0
Helpful
3
Replies
CreatePlease to create content