Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to monitor activity /usage on the switch

Hi

how to monitor the activity of the switch, or how to identify which connections are remained inactive for long time

sample out puts is pasted below

Interface Status Description Last Used

FastEthernet0/3 down 0z222 4w2d,

FastEthernet0/4 down 1z144 1w2d,

FastEthernet0/6 down 1z192 1d06h,

Please let me know whats the command used to get the above output

regds

KSK

9 REPLIES

Re: How to monitor activity /usage on the switch

Hi

Try show interfaces status inactive

New Member

Re: How to monitor activity /usage on the switch

hi

i dont think so its the correct one

regds

KSK

Re: How to monitor activity /usage on the switch

What switch are you on ?

Purple

Re: How to monitor activity /usage on the switch

If it is a 4500 then it's "show int link " . They are really the only ones that will easily give you that information . Wish they would include that command on all models , it seems to be a highly requested feature .

New Member

Re: How to monitor activity /usage on the switch

Hi

The model of Switch is cisco WS-C2950G-48-EI

regds

KSK

New Member

Re: How to monitor activity /usage on the switch

Thanks for that little gem, I have to look after 50 x 4506/4510's and that will come in handy. Just for info, it also works on 4948's.

Purple

Re: How to monitor activity /usage on the switch

Correct it would work on the 4948's because they run the same exact code as the 4500's .

Hall of Fame Super Gold

Re: How to monitor activity /usage on the switch

Nice little gem this one. Works on a ME-4924-10GE too.

Hall of Fame Super Gold

Re: How to monitor activity /usage on the switch

Have you tried using Solarwinds' Network Engineer's Toolset? Using SNMP, one of the applications, Real Time Interface Monitor, will do exactly what you are looking for.

345
Views
10
Helpful
9
Replies