How to open multiple router consoles under single window in gns3
i'm back to the suport community after a long time since i completed my CCNA certification with 93%, thanks to tis community which helped me post my doubts and those ppl who helped me to get through CCNA.
Inappropriate section to start this discussion on, but nontheless need your help in the subject mentioned above.
I'm now preparing CCNP and since GNS3 is the main tool to get the labs configured, can anyone help me on
"How to open multiple router consoles under single window in gns3". I have watched several training videos with the same configuration.
Have tried several times going through google.com on the solution, but have never succeeded and have totally messed the files in the hope of configuring it.
Any help will be much appriciated as CCNP requires this function for ease of operation.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...