How to open multiple router consoles under single window in gns3

[Sagar Hiremath]

Hi Guys,

i'm back to the suport community after a long time since i completed my CCNA certification with 93%, thanks to tis community which helped me post my doubts and those ppl who helped me to get through CCNA.

Inappropriate section to start this discussion on, but nontheless need your help in the subject mentioned above.

I'm now preparing CCNP and since GNS3 is the main tool to get the labs configured, can anyone help me on

"How to open multiple router consoles under single window in gns3". I have watched several training videos with the same configuration.

Have tried several times going through google.com on the solution, but have never succeeded and have totally messed the files in the hope of configuring it.

Any help will be much appriciated as CCNP requires this function for ease of operation.

Thanks in advance

Sagar /-/iremath

[johnlloyd_13 · Accepted solution]

hi,

i use superputty when emulating in gns3. you can follow from this link/blog:

http://chrisklv.blogspot.sg/2012/08/configuring-superputty-for-gns3.html

i can't seem to make secure crt work. i already gave up.

[Sagar Hiremath]

Hey John,

You are the MAN! thanks so much bud

Broke my head everyday trying to achieve this task, finally what an easy way to get this done.

Thanks very much mate!!

Note: Found this simple video under the post

http://www.youtube.com/watch?v=ftl-daekJ8c

hope this will help so many facing the problem, you are the genius thanks a ton...

here i go with my CCNP journey!! now no stopping me

Message was edited by: Sagar Hiremath

[Sagar Hiremath]

Hi Guys,

I found another way of getting the PuTTY and SuperPuTTeY installed automatically with the GNS3.

Go to the GNS3 websit

www.gns3.net/, install the later version of GNS3 i.e., gns3 v0.8.6 ( http://www.gns3.net/download/# )

While installing the latest version of gns3, you will find the Super PuTTY option in the installation window, check mark it. This will install both the PuTTY & SuperPuTTY automatically.

Then just follow this easy video http://www.youtube.com/watch?v=ftl-daekJ8c

All the best for all of you with GNS3 hope this will be helpful.

regards

Sagar /-/iremath