Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

How to save configuration with SNMP

Hi,

I'd like to know how to save the running configuration to the startup with SNMP?

We're using 2950, 2960, 3550, 3560 switches.

Please let me know.

Thanks.

Rob

1 REPLY
Bronze

Re: How to save configuration with SNMP

Use the snmp-server commands (like snmp-server enable and snmp-server community etc). When the config is saved using the "write mem" command, free space in NVRAM decreases continuously (seen by issuing the "dir nvram:" command).

1024 bytes are lost every time the command is issued. If this is repeated to the point where there is no more free NVRAM left, the following warning is displayed by the switch.

262
Views
0
Helpful
1
Replies