I want to configure my switch to show me logs of all the activities performed by a any specific user which is created on that switch.
I donot have tacacs server .
I have used the below command to achive so but cudnt succeed.
aaa authentication login default group tacacs+ local
username test privilege 15 password 0 test
But when i see sh log command it is only shows as below-
%SYS-5-CONFIG_I: Configured from console by test1 on conso
But i want to see some thing as test1 user has shutdown vlan 10 for example and if any other user also do some global changes on the switch it should show exactly in the switch lile what that user has done.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...