Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

How to set up guest wifi network on 1200 series APs with disclaimer web portal?

I've been thinking about this one for awhile. I want to set up a guest wifi network without any security (AES / TKIP) that allows guests to connect. Ideally, their web browser would be redirected to a web portal containing legal disclaimers, and they would need to accept the terms and conditions to use the guest wifi. I would also like to have them be required to visit the web portal again every 8 hours after that to accept the terms and conditions again.

I have a Cisco 1240AG access point already. What else do I need to make this work?

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

I don't believe you can do

I don't believe you can do this just with an AP running in autonomous mode you would need to have a WLC to configure the splash page.

Have a look here:

http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-0/configuration/guide/c70/c70users.html#wp1049273

Alternatively you can use software running on a PC/Server. Something like http://www.antamedia.com/hotspot/

Hope that helps!

Matty

1 REPLY
Bronze

I don't believe you can do

I don't believe you can do this just with an AP running in autonomous mode you would need to have a WLC to configure the splash page.

Have a look here:

http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-0/configuration/guide/c70/c70users.html#wp1049273

Alternatively you can use software running on a PC/Server. Something like http://www.antamedia.com/hotspot/

Hope that helps!

Matty

133
Views
0
Helpful
1
Replies