11-14-2013 09:20 PM - edited 03-07-2019 04:37 PM
Hey guys
I am onboard a vessel where I have a Cisco 1921 router with intergrated 8-port dwitch. I have no experince what so ever with Cisco, onlye knowledge about netwrok in general.
What I need to do is to create 3 VLANs wit different networks and thier own gateways internally( no external routers, no external switches), and I want client in all networks to be able to communicate qith each other:
Vlan 2:
192.168.0.0
Default Gateway: 192.168.0.1
Network Mask: 255.255.255.0
Vlan 3:
192.168.1.0
Default Gateway: 192.168.1.1
Network Mask: 255.255.255.0
Vlan 4:
192.168.2.0
Default Gateway: 192.168.2.1
Network Mask: 255.255.255.0
As mentioned abode, I need clients from each VLAN to be able to communicate with each other. Se drawing
11-18-2013 09:20 AM
Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
It might be as simple as defining VLAN interfaces for your 3 VLANs, and they assigning the ports to one of the 3 VLANs.
11-18-2013 12:43 PM
you may have to create bvi to make it work.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide